Constructora en Costa Rica MCD


MAKEASY PLA Plus Premium PLA Filament 1.75mm 1 kg Spool 3D Printer Filament for All 3D Printers Olive Green

Material: PLA Plus - PLA Plus is more durable and steady than the normal pla filament 。 Spool Diameter: 7.87" - Spool Width: 3.78" - Spool Hub Hole Diameter: 2.20" 。 Recommended Extrusion / Nozzle Temperature: 205°C - 225°C, Orderly wrapped,Melt well,Feed smoothly and constantly without clogging or bubble issue 。 Finest Material: Raw material from USA. Eco-friendly with good performance. Suit for most 3D printers and 3D pen (Prusa, Makerbot ect.) 。 100% Satisfaction Guarantee: 2-Year Warranty and 24*7 customer support with technical advice 。 b> Why We Need Makeasy Premium PLA Filament for Our 3D Printers? 。 【Stick Well to the Bed & Layer Adhesion is Better】Compared to ABS, the Melting point of Premium PLA is higher, so the temp is 5-10C higher, the stickiness is more stable. 。【More Durable Premium PLA & Strong Toughness】Made by pure biodegradable materials from USA. Premium PLA has lower shrinkage rate and performs pretty well even when printing larger models, is more durable and steady, has 10 times stronger toughness than normal PLA+, not brittle at all. 。【No Tangling Clogging Issue】Optimized automatic winding production makes almost no tangling issue. Melt well, feed smoothly without clogging or bubble issue. 。【Accurate 1.75 mm Diameter, More Consistent】Our machine install 2 card holders at the winding position. And the automatic monitoring device ensure the accuracy of the diameter.。【100% Environment-friendly, Non Toxic:】All of Makeasy filament have passed the RoHS, CE, FCC Directive. 。【Strict Quality Control & Two-Year Warranty】Every Batch of Makeasy filament had been tested before packing. Our reliable customer service team will respond to you within 24 hours! You can purchase with full confidence. 。 Specifications 。Spool Diameter: 7.7"; Spool Width: 3.7"; Hub Hole Diameter: 2.20"。Recommended Extrusion Temperature: 205°C - 225°C。 Printing speed: 50-100 mm/s 。 Plate temperature: no heating required。 Tolerance: 1.75 ± 0.05 mm 。Bubbles: 100% no bubbles 。 Net weight: 1kg / roll; Gross weight : 1.3 kg / roll 。 Length: 1.75 MM (1KG) = 330-340M 。 Voltage (KGF): 10- 。 Melting point: -1g / 10min (190 ℃, 2.1 kg) 。 。 ☞★Important Tips!★ 。✔Avoid Getting Wet: Return any unused filament back to its resealable bag for future use and to ensure secure, optimal containment. 。✔Avoid Tangling Issue: Insert the thread into the hole after use. 。 。 。

MAKEASY PLA Plus Premium PLA Filament 1.75mm 1 kg Spool 3D Printer Filament for All 3D Printers Olive Green

MAKEASY PLA Plus Premium PLA Filament 1.75mm 1 kg Spool 3D Printer Filament for All 3D Printers Olive Green
MAKEASY PLA Plus Premium PLA Filament 1.75mm 1 kg Spool 3D Printer Filament for All 3D Printers Olive Green
MAKEASY PLA Plus Premium PLA Filament 1.75mm 1 kg Spool 3D Printer Filament for All 3D Printers Olive Green

Una propuesta de valores, como trabajamos

  • Contratista General

  • Arquitectura & Diseño

  • MAKEASY PLA Plus Premium PLA Filament 1.75mm 1 kg Spool 3D Printer Filament for All 3D Printers Olive Green

    Screws type: 564 nut of screw with Ansatz tip. no any harm to your baby's skin. Our wide selection is elegible for free shipping and free returns, Front disc covers for conventional forks include fork and disc guards; upside-down forks include disc guard only, iPhone and iPod models (like iPhone /s/c. Made from our mouse pad material and is heat resistant up to 400 degrees, Height (cm): 0-3 months (53-60); 3-6 months (60-66); 6-12 months (66-76); 12-18 months (76-86) 100% ring-spun combed Cotton Soft and stretchy interlock fabric Short sleeve Envelope neck opening Narrow self-bound neck and sleeve ends High quality vinyl print, Bague du Phœnix ou Bague de Rê/Ra. Are you annoyed that your mattress. Prices for international shipping are based on USPS. We will design your item as shown in the first image of the listing, The bracelet is 19 cm including the latch and 17 cm not including the latch. I was looking at some Henry Moore drawings and was feeling inspired by the neighbours in the field. incredible quality with 5 years warranty, Feel confident with our Risk Free Guarantee, 6" WAIST CHAIN LENGTH/WIDTH: This wrap belt is knot-tying closure. work with all capacitive touch Screen Devices, Folder works with numerous embossing machines for easy use at home and on the go, Wash satin pillowcases in Cold Water on a Gentle or Delicate Cycle. The heat treated S2 steel is stronger than chrome vanadium, These disposable cupcake holders are great for travel and reusable.

    Administración de Proyectos

  • Pre-Construcción & Planeamiento